Cad Wiki for Analog IC Courses

off-campus - [Method 3: X11 Forwarding over SSH]

vsaxena (vsaxena@undisclosed.example.com) — 2024-08-31T00:41:25+0000

Access to Cadence Tools In order to use Cadence from outside the UD Campus, you will need to use VPN to access the ECE VMs (i.e. cpeg424.ece.udel.edu). If you are in the campus network, then skip the VPN setup. VPN Setup Follow these steps to setup your off-Campus Cadence access:

ssh_x11 - [X11 Forwarding over SSH]

vsaxena (vsaxena@undisclosed.example.com) — 2024-08-30T22:02:10+0000

X11 Forwarding over SSH Linux and Mac users can directly use ssh instead of the X2Go client. Mac users will need to install the XQuartz software. Use the following command ssh -XY [username]@cpeg424.ece.udel.edu There are couple of different SSH Clients available for

analog

vsaxena (vsaxena@undisclosed.example.com) — 2024-08-28T16:47:11+0000

Cadence Setup for CPEG 424/624: Analog IC Design Login to the ECE Linux VM cpeg424.ece.udel.edu using the VNC Client. Setting up the NCSU PDK 1) Open the .bashrc file in your home directory. If it doesn't exist already, then create one using a text editor such as gedit

cad_tutorials - [CMOS Inverter and Ring Oscillator]

vsaxena (vsaxena@undisclosed.example.com) — 2024-06-11T01:15:46+0000

Cadence Video Tutorials [Cadence Bindkeys Cheat Sheet] NCSU PDK Design Rules (html site), (PDF doc) [ NCSU 180nm CMOS Process Data] ---------- Lab 1: Schematic Design and Simulation * Schematic Design: Resistor Divider. Spectre DC operating point analysis, annotating node voltages (10:33) * Schematic Design and Simulation: RC Circuit. Spectre AC and transient analysis (22:57) * Hierarchical Schematic Design: Ideal Opamp Modeling. Hierarchical design and simulation. (23:13)

cadence_faqs

vsaxena (vsaxena@undisclosed.example.com) — 2021-11-03T22:02:43+0000

General Cadence FAQs Q. Why do we use Cadence and not any other software? A. Detailed answer is posted here. ---------- Q. My schematic and/or layout is locked up and I can't edit it. What should I do? A. In short, use clsAdminTool directly from command terminal. To remove ALL the edit locks in your directory tree, type

wiki:copy_lib.png - created

vsaxena (vsaxena@undisclosed.example.com) — 2021-11-03T21:52:39+0000

vnc_install - [VNC Remote Connection Setup]

vsaxena (vsaxena@undisclosed.example.com) — 2021-09-05T03:13:04+0000

VNC Remote Connection Setup There are couple of different SSH Clients available for Windows. You can use either use Bitvise or Putty ssh clients. Bitvise SSH Client * Download and install Bitvise SSH client from https://www.bitvise.com/ssh-client-download * From your SSH client, connect to

wiki:ssh2.png

vsaxena (vsaxena@undisclosed.example.com) — 2021-08-31T04:41:59+0000

wiki:ssh3.png

vsaxena (vsaxena@undisclosed.example.com) — 2021-08-31T04:41:59+0000

wiki:vncserver1.png - created

vsaxena (vsaxena@undisclosed.example.com) — 2021-08-31T04:41:59+0000

wiki:vncserver2.png - created